Pressure Transducers Suppliers For Injection Mold Making

Successful injection mold making companies are using pressure transducers suppliers to help add value to their molds. Since the 1960’s injection molders have used pressure transducers to monitor many different aspects of molding and this trend is only growing.

As globalization and an uncertain economy take their toll on mold making, it makes sense to add high value to you finished product. Now that pressure transducers can be designed and installed in a greater variety of locations, with varying purposes, the applications are more robust than ever.

Pressure Transducers Suppliers
Kistler Pressure Transducer

The pressure transducer can sometimes help win the contract because it demonstrates that the molder is using scientific molding, rather than flying by the seat of his pants.

Why use a pressure transducer supplier?

Using a pressure transducer enables mold makers to gain precise and accurate data about how the tool is actually performing in production. Some of the types of information that can be gained are:

  • How different fill speeds affect the balance of the tool.
  • What kind of effect varying temperatures have on the final part.
  • How different cooling temperatures affect the outcome of the part.
  • To obtain accurate information when using slides and the effect of molding pressure on the components.
  • To help with the design of a more robust core and cavity.

Why not just use simulation software

A detailed comparison of simulated results with actual in-process data will quickly answer that question!

Pressure Transducers Suppliers
RJG Pressure Transducer

Make sure that the pressure transducers are properly installed, working properly and are actually used in the molding process.

Quality pressure transducer manufacturers

RJG Kistler

Use pressure transducer information to help the customer
A customer who has just spent many thousands of dollars will most likely benefit greatly from the precise and detailed information you can provide. Pressure sensors were rather delicate in the past, as well as difficult to install.

Now, with the aid of solid modeling the model for pressure sensors can be electronically sent from the customer to the mold maker. This greatly helps to avoid the possibility of a poor location or improper installation.

Conclusion
When used as value added injection mold components, pressure transducers can help the mold maker to gain a competitive edge. With the increase of international competition, the trend toward more sophistication will continue and the use of pressure sensors is a good example of adding a valuable service to help the customer.

Finding industrial supplies

Leave a Reply

Your email address will not be published. Required fields are marked *